1. Bed minimum to be at least 54" wide, 75" long, and 10" from
the ground to the bottom of the bedspring or frame support. No
part of the bed may exceed 90" in width or 100" in length. Distance
between wheels may not exceed 80" from the outside to outside
of the wheels, front to rear, with an overall bed length not
to exceed 100". Maximum height can't exceed 96" from the ground.
2. Push bars are allowed, but may not extend beyond the maximum
dimensions of the bed size. All push bars are to be designed
for safety with no sharp or jagged edges allowed.
3. Beds must have a box spring, mattress, water, or air bag, and
be an acceptable sleeping device. Air mattresses must be full
size or larger and must be inflated.
4. Beds must have four wheels, no more or less, and be designed
so that all four wheels contact the ground. All wheels must be
load bearing but do not have to be the same size.
5. Steering mechanisms may be used. No bed may have motorized
or mechanical means of motion. All means of motion is limited
to race team members.
6. No distinction is made between bed and appendages. All appendages
attached to bed are included in the term of bed. When being judged,
all decorations on the bed must be left on the bed for racing,
unless determined by judges that for safety reasons they must
be removed.
7. A race team consists of five people, 16 years or older. Substitutions
aren't allowed. The bed must be constructed in a fashion that
all pushers must be able to see the racecourse in front of the
bed when they are pushing the bed.
8. One member of the team must be on the bed at all times.
9. In order to qualify for a race, at least four out of five team
members must cross the finish line in contact with the bed and
three members must also be in contact with the ground when crossing
the finish line.
10. No sharp or dangerous objects may protrude from the bed. All
beds must have protective bumpers.
11. All bed and team costs are borne by entrants. This includes
entry fee.
Failure to report for bed inspection prior to
race time will mean disqualification and forfeiture of entry
fee. All entrants failing to pass bed technical inspection will
have until race time to make the necessary alterations to their
bed.
In the case of extreme inclement weather (e.g. lightening, tornadoes,
etc.) the Bed Race will be cancelled.
|